3 Tone - Blue

SHIPPING
• Processing time is 1-3 business days (not including weekends or holidays).
• Estimated shipping time is 3-5 business days (not including weekends or holidays).
• A tracking number will be emailed once your order has been processed. Please be sure that your email address is valid and spelt correctly at the time of purchase.
• If your tracking number states that your package was delivered, but you did not receive it please file a claim with your post office. LENSESXO does not accept responsibility.

RETURNS
• Returns/exchanges will only be permitted if products are defective and in SEALED container.
• Returns/exchanges will only be permitted if customer service is notified within 3 days of arrival.
• Returns due to customer not liking the color will not be accepted.
• In the case of a return/exchange the buyer is responsible for all shipping costs, and must provide a tracking number to LENSESXO.
• Shipping costs will not be refunded.

Step 1: Check the lenses

We try our best to check lenses before sending them out to you, but sometimes defects aren't easily seen. Please contact us right away if you detect any of the following:

The container is cracked or broken.The lenses have nicks or tears.The lenses are not the same color.The lenses are expired. 

Step 2: Preparing lenses for use

Before wearing your lenses for the first time make sure to let them soak for at least six (6) hours in multipurpose solution for soft contact lenses. 

Step 3: Cleaning & Hygiene

Keeping your lenses clean is very important and will help minimize the risk of bacterial infections. 

Make sure to always wash your hands with mild soap before handling your lenses.

Step 4: Putting in lenses

Putting in contact lenses can be a little tricky, especially if you’ve never worn them before. But as with everything, practice makes perfect!

Make sure to wash your hands properly with soap and water before touching the lens.

Place the first lens on your palm and rinse with several drops of saline solutions; repeat to ensure all traces of disinfecting solution used to soak lenses is fully removed.

Place the lens on your index finger.

Make sure the lens is in a bowl shape and not inside out.

Always start with the same eye in order to avoid mixing up your lenses.

Pull your lower eyelid down with your middle finger on the same hand.

With your other hand pull up your upper eye lid and carefully place the lens on your eye.

Blink a few times.

Repeat the same procedure on the other eye.

If your lens feels uncomfortable, remove it and inspect it for damage or debris.

Rinse it with more solution and reapply.

Step 5: Removing lenses

After you’ve had your fun with your contact lenses it’s time to remove them. 

Again, make sure to wash your hands properly with soap and water before touching the lens.

Look up and pull down your lower eye lid.

Always start with the same eye in order to avoid mixing up your lenses.

Bring your index finger to touch the lower edge of the lens.

Slide the lens down to the lower white part of your eye.

Gently squeeze the lens between your thumb and index finger and remove it.

Repeat the same procedure on the other eye.

Important Information

Cleanliness is the most important aspect of proper contact lens care. It’s important to care and follow proper maintenance for successful wearing.

Cleaning and disinfecting solutions are import to minimize the risk of bacterial eye infections. Remember to always use fresh solution and discard solution from lens case after each use.

Saline solution and daily cleaner can be purchased at any drug store/pharmacy. The saline solution is used for rinsing your contact lenses. The daily cleaner is used for cleaning your contact lenses.

Cleaning your contacts is very easy. Just place a few drops in the palm of your hand and carefully rub the lens for about 20 seconds, making sure to clean both sides.

Multipurpose solution can be used for cleaning, rinsing, disinfecting and storing your contact lenses. Clean your lenses as you would with daily cleaner, then rinse, disinfect, and store with multipurpose solution.

Automatic Contact Lens Cleaner is a device that automatically cleans your lenses. This device is clinically tested and proven to be three times more effective than standard finger rubbing cleansing.

Lens Case Cleanliness and frequent case replacement is essential for minimizing the risk of contamination. Rinse your lens case and covers in hot running water. Replace lens cases at least once every three (3) months.

Prevent dryness by re-wetting lenses as needed with Contacts Eye Drops.

Do not sleep or swim with contact lenses in your eyes.

Do not wear your contacts for more than eight (8) hours per day.

Do not use tap water to rinse or store lenses. Tap water contains chlorine, minerals and metal particles, which can damage both the lenses and the eye. Most importantly, water contains micro-organisms, which can lead to serious infections of the eye.

Do not panic if your lens gets lost behind your eye. It should work itself around to where you can see it. If the lens does not work itself around, try putting some eye drops or a few drops of saline solution into your eye. Next, look up, down and from side to side to attempt to move the lens. You can also close your eyes and gently move your finger over your eyelids around the socket of the eye to reposition the lens. This may help move the lens to where you can see it more easily.

Put in your contact lenses before applying makeup.

Take out your contact lenses before removing makeup.

Remove your lenses immediately if you develop unusual pain, experience stinging, redness, unusual blurred vision, discharge or light sensitivity. If lens is damaged, do not put the lens back on your eye.